Test voltage range: 1000V/500V (SME1202A/SME1202B) Insulation resistance test range: 100kOhm-10TOhm Manual or auto range mode (6 ranges) Insulation resistance, leakage current dual display 4-bin comparison function: 3 bins for PASS1 bin for AIL Zero clearing functionContact detection function for capacitive components Fast test: 30ms Programmable sequence test mode 20 setup files can be stored in the internal memory, support U-disk Measurement data can be stored on U-disk Automatic firmware upgradion by a disk Handler interface realizes on-line operation Remote control by RS232C and USB Device interface Footswitch trigger function 480*272, 24 bit, 4.3-inch TFT & touch LCD screen
| SME1202A | SME1202B | |
| Test Voltage | ||
| Range | 1V–1000V | 1V–500V |
| Accuracy | ≥ 10V:± 1% 1V ,<10V:± 10% 1V | |
| Resistance Test | ||
| Range | 100kOhm-10TOhm | |
| Accuracy | >10A:±2%,<=10nA:±5% | |
| Test current | ||
| Ranges | >100 A–1mA 10 A–100 A, 1 A–10 A, 100nA–1 A, 10nA–100nA, 1nA–10nA, | |
| Accuracy | 2%±3pA | |
| Current Limit | 10mA | |
| ON/OFF | Manual on/off on front panel, or controlled by built -in timer, or by remote control | |
| Charge Time | 0–999s programmable | |
| Measurement Delay | 0–999s programmable | |
| Measurement Speed | Fast ≤ 30ms, Slow ≤ 60ms | |
| Comparator Function | 4 bins : 3 bins for PASS, 1 bin for FAIL | |
| Range Mode | Auto,Hold | |
| Memory | Internal memory and external USB disk | |
| Standard Interface | RS 232C,USB HOST, USB DEVICE, HANDLER | |
| General Specifications | ||
| Operating conditions | 0°C – 40° C, ≤90%RH | |
| Input Power | 198V – 242V AC, 50Hz | |
| Power Consumption | <50VA | |
| Dimentions | W:235mm, H:104mm, D:360mm | |
| Weight | 3.6kg Approx. | |
| Accessories | Two Terminal Test Clip Leads, User Manual(std), Foot Switch(Optional)/td> | |